Products Catalog 2015-2016 •
49
OHB
High Density Aluminum Draft Barrier
Color
• Standard: white, almond.
• Optional: metallic silver, bronze, metallic charcoal, aluminum,
semi-gloss black (10% upcharge).
• Custom colors available upon request.
Finish
• Standard: epoxy/polyester powder paint.
• Optional: anodized aluminum.
Voltage
• 208V, 240/208V, 277V, 347V, 600V, 50/60 Hz, 1-phase.
Construction
• 14-gauge (0.0787 in. [2 mm]) aluminum front cover.
1
• 18-gauge satin coat steel cabinet.
• Screw assembly for added strength.
• Full length built-in wireway.
• Separate low voltage wireway (-WW) available.
• Pencil-proof openings less than 1/4 in. (6.4 mm).
2
• Bottom fresh air inlet, top warm air outlet.
• Clean back available (-BD).
• Linear high-limit temperature control with automatic reset.
3
High altitude version available (-HA).
• End caps included.
Heating element
• Two stainless steel tubular heating elements with aluminum fins.
• Floating heating elements on high-temperature nylon bushings
eliminating expansion noises.
4
Watt density
• Average standard watt density 355W/ft. (1165W/m).
• Average low watt density 175W/ft., 250W/ft.
• Average high watt density 500W/ft.
Control
• Built-in thermostat available with a control knob or tamperproof.
• Mechanical, electronic or pneumatic relays available.
Ouellet highly recommends to use an electronic wall thermostat
for greater comfort.
Installation
• Not for residential use in the United States.
• Heater must be installed at least 3 in. (76 mm) from finished floor.
• Mounting holes spaced on 2 in. (51 mm) intervals for ease of installation.
• Installation on wall or floor mounted with pedestals.
5
• Pedestal kit available.
• Variety of accessories available for wall-to-wall installation.
Warranty
• 1-year warranty against defects.
Application
• Commercial building, office building, hospital, daycare center,
private residence.
Features
1
2
3
4
5
With pedestals
147 mm
5
3/4
"
81 mm
3
3/16
"
76 mm
3"
57.2 mm
2
1/4
"
47 mm
1
7/8
"
153 mm
6"
60 mm
2
3/8
"
147 mm
5
3/4
"
Side View
Front View
Rear View
Top View
Sufficient Height
of 76 mm (3") from Floor
Clean Back (-BD)
Standard Finish
on the Back of the Heater
KOE Ø6.4 mm
KOE Ø
1/4
"
KOE Ø22 mm
KOE Ø
7/8
"
