Products Catalog 2015-2016 •
34
OTM
Floor Heating Cable on Mat
OTR
Floor Heating Cable for Membrane
Voltage
• 120V, 240/208V, 1-phase.
Cold lead length
• 13’6" (4.2 m).
Control
• Two types of control method possible (see instruction manual
for details):
- Surface heating control with electronic thermostat in floor
mode (F) and temperature sensor.
- Ambient heating control with electronic thermostat in ambient mode
with floor limit (A or AF) and temperature sensor.
Note: A ground fault circuit interrupter (GFCI) must be used with this heating
device unless exempted by the applicable national and/or local electrical
code for the area of installation.
Included materials
• 15’(4.6 m) temperature sensor.
• Measurements table label (to be placed in electrical panel).
Installation
•
Never cut or shorten the heating cable.
• For indoor applications only.
• On concrete slab or plywood subfloor.
Warranty
• 25-year warranty on the heating cable.
Application
• Kitchen, bathroom, entrance way, family room, living room.
Features
Construction
• Heating cable made of a twin conductor fastened to an adhesive
fibreglass mat for a simpler and faster installation with negligible
magnetic field.
Watt density
• 12W/sq. ft. (130W/sq. m), 3”(76 mm) spacing.
Dimension
• Mats of 16 in. (0.41 m) in width offered in several lengths.
OTM Features
Construction
• Heating cable made of a twin conductor for a simpler and faster
installation, compatible with uncoupling membrane systems.
Watt density
• 12W/sq. ft. (130W/sq. m), 3”(76 mm) spacing.
• 10W/sq. ft. (108W/sq. m), 3
1/2
”(88 mm) spacing.
Installation
• Strapping not included [3’’(76 mm) spacing].
If required, please order separately the OWF-G25-P.
• On uncoupling membrane not included [3
1/2
’’(88 mm) spacing].
• For heating cable installation on uncoupling membrane systems,
consult the membrane manufacturer’s instructions to ensure
that it is compatible with the use of heating cables.
OTR Features
Training available online
(
OTM
)
OTM
OTR
16’’
0.41 m
Length (x)
PVC Sheath
